Prices last reviewed October 2026 · By the RoofingCostEstimate editorial team · How we source figures
Commercial flat roofs cost about $4 to $11 per square foot to replace, according to HomeGuide[1]. Industry estimating ranges for full commercial specs, including tear-off of one layer, R-25 polyiso insulation and cover board, run about $5 to $26 per square foot depending on the system[2]. Most warehouse and manufacturing jobs fall between $7 and $12.
Source note: HomeGuide is a consumer cost guide. The system-by-system table below comes from The Roofing Brief's estimating ranges, an industry publication rather than survey data. Treat it as a bid benchmark and confirm it with local quotes.
Commercial roof replacement cost per square foot, by system
| System | Spec / attachment | Installed / sq ft |
|---|---|---|
| TPO | Mechanically attached, 60 mil | about $7 – $9 |
| TPO | Fully adhered, 60 mil | about $8 – $12 |
| TPO | Ballasted, 60 mil | about $5 – $8 |
| EPDM | Mechanically attached, 60 mil | about $6 – $8 |
| EPDM | Fully adhered, 60 mil | about $7 – $10 |
| EPDM | Ballasted, 60 mil | about $5 – $7 |
| PVC | Fully adhered, 60 mil | about $9 – $15 |
| Modified bitumen | 2-ply SBS | about $7 – $12 |
| Standing seam metal | 24-gauge Galvalume | about $14 – $22 |
| Insulated metal panels | 5-inch PIR | about $16 – $26 |
Source: The Roofing Brief[2]. Prices include tear-off of one layer, R-25 polyiso, cover board, membrane, fasteners and flashings. They exclude crane fees, complex details and regional add-ons.
For comparison, HomeGuide's installed membrane ranges (residential and light commercial) are TPO $4 – $10, EPDM $3.50 – $10, PVC $5 – $12, modified bitumen $4 – $7.50, built-up $3.50 – $7.50 and metal $5 – $16 per square foot[1]. Our flat roof replacement cost page uses the same HomeGuide figures.
What a commercial roof costs in total
The Roofing Brief gives these worked examples[2]:
- A 20,000 sq ft warehouse re-roofed with 60-mil mechanically attached TPO over R-25 polyiso: about $140,000 to $180,000 at the field rate, plus add-ons.
- A 100,000 sq ft distribution center on the same spec: about $700,000 to $900,000.
- A 50,000 sq ft warehouse once real add-ons are priced in: about $450,000 to $600,000.
Line items that sit outside the per-square-foot price
The same source lists costs that commonly appear as separate lines or change orders[2]:
- Crane fees, material hoisting and rooftop staging.
- Tapered insulation for slope-to-drain, often a $2 to $4 per sq ft premium on the affected area.
- Tear-off of additional layers beyond the first.
- Deck repair or replacement (corroded steel, rotted wood, spalled concrete).
- New drains, scuppers, gutters and downspouts.
- Parapet cap replacement, typically $25 to $60 per linear foot.
- Curbs and flashing for new rooftop equipment, plus HVAC disconnect and reset.
- Permits, structural review and engineering stamps.
- Manufacturer warranty registration, $200 to $2,000 depending on term.
Membrane thickness and wind design also move the price. Going from 60-mil to 80-mil TPO adds about $0.50 to $1.00 per sq ft, and a higher wind-zone fastener pattern (FM 1-120 instead of FM 1-90) adds $0.30 to $0.80[2].
Which system fits which building
The Roofing Brief matches systems to building types[2]:
- Food plants, hospitals or restaurants with chemical exposure: fully adhered PVC, about $9 – $15 per sq ft.
- Hot climates with few penetrations: white TPO, mechanically attached ($7 – $9) or adhered ($8 – $12).
- Hail-prone buildings with simple geometry: mechanically attached EPDM, $6 – $8.
- Heavy rooftop traffic: 2-ply SBS modified bitumen, $7 – $12.
- Cold storage: insulated metal panels, $16 – $26.
- Decks that can't take fasteners (lightweight concrete, gypsum): a fully adhered system.
Size matters too. The same source says per-square-foot pricing falls as buildings get larger, up to about 100,000 sq ft, because mobilization, dumpsters, project management and supervision are largely fixed costs[2].
How to compare commercial roofing bids
- Normalize the spec. Compare membrane type and thickness, insulation R-value, cover board, attachment method and warranty term line by line. The Roofing Brief warns that a low per-square-foot number often means bare field installation, with extras billed later[2].
- Ask what's excluded. Use the list above as a checklist.
- Check the code path. Reroof permits, energy code insulation upgrades and wind requirements depend on the jurisdiction. Sacramento, for example, applies California cool-roof rules to non-residential reroofs covering more than 50% of the roof area or more than 2,000 sq ft[3].
- Confirm licensing. Many states license commercial roofers by project value. Tennessee requires a contractor license for projects of $25,000 or more[4], and North Carolina requires a general contractor license at $40,000 or more[5].
Repair, restore or replace?
Coatings and targeted repairs can extend a sound membrane. Replacement makes more sense when the insulation is wet, seams are failing across the field, or the deck is damaged. A core cut or infrared moisture survey is the usual way to decide (editorial guidance; we didn't find a sourced cost for commercial moisture surveys). HomeGuide lists infrared and drone roof inspections among residential inspection types costing $75 to $600[6]. Commercial surveys are typically quoted separately.
For residential low-slope roofs see flat roof replacement cost. For pitched homes see the average roof replacement cost and the roof replacement cost calculator.
Frequently asked questions
How much does a commercial roof cost per square foot?
HomeGuide puts commercial flat roofs at $4 to $11 per square foot. The Roofing Brief's estimating ranges run from about $5 (ballasted EPDM) to $26 (insulated metal panels), with most warehouse jobs at $7 to $12.
How much does a TPO commercial roof cost?
The Roofing Brief lists 60-mil TPO at about $7 to $9 per square foot mechanically attached, $8 to $12 fully adhered and $5 to $8 ballasted, including tear-off of one layer and R-25 polyiso.
How much does it cost to re-roof a 20,000 sq ft building?
The Roofing Brief estimates $140,000 to $180,000 at the field rate for 60-mil mechanically attached TPO over R-25 polyiso, plus add-ons such as cranes, drains and parapet caps.
What isn't included in a commercial roofing price per square foot?
Commonly excluded: crane fees, tapered insulation, extra tear-off layers, deck repair, drains, parapet caps, HVAC disconnects, permits and engineering, and warranty fees.
Check a contractor's license (HomeProFax)
Sources
- HomeGuide, Flat roof replacement cost (Nov 5, 2025), accessed Oct 29, 2026.
- The Roofing Brief, Commercial roofing costs per square foot (last reviewed Oct 2026; industry estimating ranges, not survey data), accessed Oct 29, 2026.
- City of Sacramento, Re-roof permits and the 2025 California Energy Code (CDD-0304), accessed Oct 29, 2026.
- Tennessee Board for Licensing Contractors, Contractor license, accessed Oct 29, 2026.
- N.C. General Statute 87-1, accessed Oct 29, 2026.
- HomeGuide, Roof inspection cost (Dec 8, 2025), accessed Oct 29, 2026.
How we source figures: every price on this page is quoted from a published cost guide or official page linked in Sources, with its date. We do not adjust national prices with city "factors". Your price depends on your roof, so compare written quotes from licensed roofers.